Semi Hot PaveWarm Mix Asphalt
Outline
Warm Mix Asphalt (Product name: Semi Hot Pave) is a mixture allowing the tempreture at the time of production and construction to be lowered by about 30℃ by adding a special additive agent (Semi Hot Support) in the plant-mixing method.
Characteristics
- Even after lowering the tempreture, it still has mixing performance and compaction degree equivalent to those of normal mixture. For this reason, it can secure performance and construction ability equivalent to normal asphalt mixture.
- Even with construction in cold seasons and of thin layer pavement, which are generally difficult with lower tempreture mixture, production tempreture dose not need to be increased too much for application.
Special modifying agent (Semi Hot Support)
Comparison of mixture properties between Normal Mixture and Semi Hot Pave (Example)
CO2 emission reduction (Example)
The emission of CO2 in the heating process of production can be reduced by 16% compared with normal mixture.
Early opening of traffic (Example)
Traffic can be opened about 40 minutes earlier than with the normal mixture.
CONSTRUCTION TECHNOLOGY
A
- Ameni-Phalt S series
- Low noise / Drainage Pavement
- Asphalt Mastic
- Underground Water Retaining Wall
- Asphalt Revetment
- Pavement of Dike Sloping
- Automobile Proving Grounds/Bicycle Race Courses
- Pavement of Straight and Curving Slopes-Lateral paving method
D
- Deep Stabilization
- Improvement of Weak Sub-grade
F
- Foamed Mastic Seal(FMS)
- Hot-mix Surface Treatment
- Foamed Stabilization
- Mixed- On-Site Stabilization with Straight Asphalt
H
- Hard Guss Asphalt
- Guss Asphalt Pavement
- HIGH SPEED TRACK
- BANK PAVING SYSTEM
I
- Interlocking Block Pavement
- Irregular-shaped Pavement
M
- Mini Road
- Instant Paving Material
N
- ND-IT Construction System
- ICT (Information Communication Technology) Construction System
O
- Omnicourt
- Loose Lay Installation/Sand Fill System
P
- Perfect-Bond Concrete Overlay Method
- Surface treatment using water-ND Waterjet System
- Permeable Color Pavement
- Hot-mix Pavement
- Poliment-Ultrapave
- Pavement Resistant to Heat and Very Heavy Load of Multi-wheeled vehicles
R
- Rainbow Brick
- Varied Shape Color Tile Method
- Rainbow Color Pavement
- Kao Mat SK
- Rainbow Color Pavement
- Rainbow Color A
- Rainbow Color Pavement
- Rainbow Color E
- Rainbow Color Pavement
- Rainbow Color MH
- R.C.C.P.
- Roller Compacted Concrete Pavement
- Recycle Stabilization
- On-Site Recycling of Existing Pavement
- Recycled Surface
- On-Site Surface of Asphalt Pavement
- Refresh Seal Mix
- Hot Asphalt Surface Treatment Method
- Refresh Seal Mix-H
- Hot Asphalt Surface Treatment Method (Hard Type)
- Road Planing
- Cold Planing
- Road Stabilization
- Improvement of Base Course and Sub-grade
- Rolled Asphalt
- Pavement Resistant to Abrasion and Skidding
S
- Safety Grooving
- Grooving for Skid-resistance
- Semi Hot Pave
- Warm Mix Asphalt
- SKID-PANEL
- Pre-cast Low μ Road
- Soft Step A
- Acrylic Resin Type
- Soft Step Grainr
- Urethane Rubber Chip N and R Type
- Soft Step Grainr
- Urethane Rubber Chip P Type
- Soft Step Master
- Urethane Solid Type
- Soft Step Pro
- Soft Acrylic Resin Type
- SPRINKLING NOZZLE
- Sprinkling Nozzle for Proving Ground
- Steel-Fiber-Reinforced Concrete(SFRC)
- Steel-Fiber-Reinforced Concrete Pavement
- Stone Mastic Asphalt
- Abrasion-and-Flow Resistant Pavement